Brochures
Email
Post Supports
Fencing Accessories
Distributors
 
PAINT ME RANGE
  MEASURING ( TIMBER/METAL POSTS, WALLS OR BRICKWORK)
All sizes refer to actual openings and not the gate, fence or rail width; we have already allowed for
the hinges etc.
   
  SPECIAL SIZES
A made to measure service is available for gates, railing and fence, where stated. Contact us with your details on our helpline, fax, or email for a quotation.
   
  FITTINGS
All metal gates, fence and railings are supplied with a pack of screw-on/bolt-on fittings to fix to existing timber, brickwork and the steel posts listed. Recommended fittings for timber gates are shown against each design for separate purchase.
   
  GATE HANGING
All tall single, single, bow tops and Classic / Regent doubles have fixed hinges. All Stirling, Edinburgh doubles, tall doubles and all Corfe / Balmoral gates have adjustable hinges to help with levelling during installation. For timber gates refer to the brochure for hinge details.
GATE LATCHING
All tall single, single and bow tops are supplied with a universal latch for left / right hand opening. All Corfe and Balmoral gates have a padlockable sliding bolt on the right hand side when viewed from the road. For timber gates refer to the brochure for latching details.
   
  SQUARE STEEL POSTS
Due to the weight of the gates, care must be taken to ensure that the brickwork is strong enough to
support them; steel posts which are concreted into the ground are recommended on all large gates.
Should you wish to hang gates on steel posts, please be sure to allow for the post widths eg. a
2438mm (8’0”) opening pair of gates and two 70mm (3’’) posts will fill a 2578mm (8’6”) gap.
   
  FINISHING
All metal gates, fence and railing showing this logo are primed in black and after fitting a further coat of good quality gloss paint is required. Timber gates are treated with a general-purpose preserver and following installation should be treated/finished with a quality preserver/varnish of your choice.
   
  AVAILABILITY AND DELIVERY
Most gates, fence and railing are available ex-stock for 7-10 days UK mainland delivery.
Made to measure items 21-28 days UK mainland delivery. Carriage charges may be applied.
   
  SPECIFICATIONS
Specifications are subject to change without prior notice.
 

For help, advice or technical support please telephone the Helpline on 01543 438217 or email sales@burbageironcraft.co.uk

 
Top
Email
meta