Description
FIN WEDGE GRIP TIMBER POST REPAIR SPUR
Repair Spurs have been designed as a fix for timber posts that have broken off at ground level due to rot or wind damage.
BIC GARDEN Hot Dip Galvanised Post Supports allow the installation of timber posts in minutes without the need for digging or mixing concrete. Manufactured from heavy gauge steel for strength and durability, they hold the post above ground level, protecting the base of the wooden post against infestation and rot.
The post support fins grip the post on two sides. This provides a sturdy clamping action. To help prevent the post from being pulled out the support box, we suggest you fix screws through the fin grip slots into the post.
The hot dip galvanised finish provides the best form of rust protection, however it remains the end users responsibility to check for damage to the coating and paint touch up as and when required.
Post support box is 150mm high.
INSTALLATION
1. Saw off the top of the broken post so that it is flush with the concrete then position the Repair Spur with its point at one corner of the old post.
2. Use a Driving Tool (or a section of timber) to drive the repair spur into the ground between the existing post stub and its concrete socket.
3. Drive in fully to provide a firm support for a new post.
If you only require 1 or 2 items then please call for possibly reduced postage cost.
SOLD IN PACKS to trade customers at trade prices.
Fits square wooden posts 75x75mm (Pack of 10 to the trade) and 100x100mm (Pack of 10 to the trade)
