Description
FIN WEDGE GRIP POST SUPPORT SPIKES
Fin Grip Timber Post Support Spikes are designed for use in firm but soft ground that allow the spikes to be driven into the ground. They allow easy installation or replacement of timber fence posts and are also suitable for a wide variety of garden structures including decking, pergolas and car ports and gazebos.
BIC GARDEN Hot Dip Galvanised Post Supports allow the installation of timber posts. Manufactured from heavy gauge steel for strength and durability, they hold the post above ground level, protecting the base of the wooden post against infestation and rot. Easy future replacement of the posts if required.
The post support fins (wedge) grip the post on two sides. This provides a sturdy clamping action. To help prevent the post from being pulled out the support box, we suggest you fix screws through the fin grip slots into the post.
The hot dip galvanised finish provides the best form of rust protection, however it remains the end users responsibility to check for damage to the coating and paint touch up as and when required.
Post support box is 150mm high.
INSTALLATION
1. Using a suitable driving tool (or a section of timber post), drive the spike into the ground at the correct location.
2. Fit the post into the box and further secure with screws through the fin grip slots.
If you only require 1 or 2 items then please call for possibly reduced postage cost.
SOLD IN PACKS to trade customers at trade prices.
Fits square wooden posts 75x75mm and 100x100mm (Pack of 5 to the trade)